{"product_id":"rule-1100-gph-auto-bilge-pump-12v","title":"Rule 1100 Automatic Submersible Bilge Pump 12v","description":"\u003ch1\u003eRule 1100 Automatic Submersible Bilge Pump 12v | 27SA\u003c\/h1\u003e\n\u003cp\u003eThe Rule 27SA 1100 series automatic submersible bilge pump with 750mm cable eliminates the need for a separate float switch to activate the pump. Once power is supplied to the bilge pump, starting and stopping is completely automatic.\u003c\/p\u003e\n\u003cp\u003eThe Rule automatic bilge pump turns on and checks for water every 2 1\/2 minutes, during this check the pump runs for approximately 1\/2 a second and checks for resistance or drag against the impeller. If resistance is encountered, it will run until water is no longer present. Thereafter the automatic bilge pump resumes the 2 1\/2 minute check cycle. The automatic bilge pump can be started at any time by turning the power off; waiting 5 seconds and then turning the power back on. The pump will start immediately and pump until the water is removed.\u003c\/p\u003e\n\u003cp\u003eThe Rule automatic submersible bilge pump is a light weight, compact pump with a tough plastic body and integral strainer. The automatic bilge pump features two leads, an automatic (brown) and a manual override (brown with a white stripe). The quick release strainer allows for rapid cleaning of the submersible bilge pump internal components.\u003c\/p\u003e\n\u003cp\u003eThe Rule 1100 series of small submersible bilge pumps are recommended for discharge heads up to a maximum of 2 metres. The submersible bilge pump meets ISO8846 marine (ignition) and ISO8849 marine (bilge pump) standards.\u003c\/p\u003e\n\u003cp\u003eThe power use during the checking mode is minimal, the bilge pump will consume 0.2 amp hours per day in the checking mode.\u003c\/p\u003e\n\u003cp\u003ePlease note - Output is based on 10 hour break-in period and at 13.6V, a minimum voltage of 10.5V is required.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigher Flow - through an optimised impeller, the 27SA is able to provide greater flow at the same amperage\u003c\/li\u003e\n\u003cli\u003eBuilt-in Thermal Cut-Off (TCO) - this provides extra protection for both the pump and the vessel it is installed in\u003c\/li\u003e\n\u003cli\u003eBack Flow Prevention - the check valve reduces the amount of water left in the bilge, minimising odour and helping to keep your bilge cleaner\u003c\/li\u003e\n\u003cli\u003eHidden Air Vents in the Body - these vents help prevent air-locking in challenging plumbing installations and helps with the check valve\u003c\/li\u003e\n\u003cli\u003eThreaded Discharge Ports - this allows for easier pump installation, and easier maintenance\u003c\/li\u003e\n\u003cli\u003eNo need for a separate float switch, as there is a third wire for a manual override.\u003c\/li\u003e\n\u003cli\u003eBase Fits Existing Rule 27S Screw Holes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFlow Rates\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOpen flow output at 0m\/0ft (0 kPa): Up to 31.5 LPM (8 US GPM)\u003c\/li\u003e\n\u003cli\u003eOpen flow output at 1m\/3.35ft (10 kPa): Up to 22.7 LPM (6 US GPM)\u003c\/li\u003e\n\u003cli\u003eOpen flow output at 2m\/6.7ft (20 kPa): Up to 16.4 LPM (4 US GPM)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rule","offers":[{"title":"Default Title","offer_id":57028844945739,"sku":"PLPU1031","price":134.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0905\/8041\/8891\/files\/rule_1100_bilge_pump.jpg?v=1776164612","url":"https:\/\/youboatmarine.com\/products\/rule-1100-gph-auto-bilge-pump-12v","provider":"YouBoat Marine","version":"1.0","type":"link"}