West System 101 Mini Epoxy Resin & Filler Pack

The West System 101 Mini Pack is designed to be your first choice when it comes to small repairs around the boat, in the workshop, at home or wherever you are. This pack contains everything you could need, from gloves for protecting your hands, to mixing cups and sticks. This resin pack contains the West System 105 epoxy resin which is designed for wood bonding, fiberglass, reinforcing fabrics, composite materials and a variety of metals.

The West System 101 Mini Pack contains a pot of 407 low density fairing filler which can be blended into your epoxy mix to create a fairing putty, allowing for easy application and is perfect for a wide range of applications.

Contains

250g epoxy resin 105
50g fast hardener 205
Microfibres 403
Low density filler 407
3x Graduated cups
2x Pairs of gloves
2x Mixing sticks
2x Syringes
1x Brush
1x Instruction leaflet

Frequently Asked Questions

What is the West System 105 Epoxy Resin?

The West System 105 Epoxy Resin is a clear, low viscosity liquid epoxy resin which forms a high strength solid bond.

What are the specifications of the West System 105 Epoxy Resin?

Cure time varies depending on the hardener used, from 1 hour to 4 hours.
Minimum recommended temperature varies with the hardener used, from 4℃ (40℉) to 21℃ (70℉)
Designed to wet out & bond to wood bonding, fiberglass, reinforcing fabrics, composite materials & a variety of metals

How do I use the West System 105 Epoxy Resin?

Simply mix the West System 105 Epoxy Resin with your chosen West System hardener using the ratio listed on the hardener to ensure an optimal cure.

What is the West System 205 Fast Hardener?

The West System 205 Fast Hardener is a specially formulated hardener that is designed to be mixed into 105 epoxy resin to allow for a rapid cure that will create a high strength, moisture resistant solid bond.

What are the specifications of the West System 205 Fast Hardener?

Cure time at 22℃ (72℉): 60 - 70 minutes
Ratio (resin:hardener): 5:1 by volume
Pot life at 22℃ (72℉): 9 to 12 minutes
Working time at 22℃ (72℉): 60 - 70 minutes
Solid state at 22℃ (72℉): 6 - 8 hours
Minimum cure temp: 4℃ (40℉)

How do I use the West System 205 Fast Hardener?

Mix the West System 205 Fast Hardener in with the West System 105 Epoxy Resin at a 5:1 by volume of resin:hardener. After 60 - 70 minutes the epoxy should be cured.

What is the West System 407 Low Density Fairing Filler?

The West System 407 Low Density Fairing Filler is a blended microballoon based fairing filler that is designed to be added to a mixture of resin & hardener to create a fairing putty. This filler is easy to sand or carve once cured.

What are the specifications of the West System 407 Low Density Fairing Filler?

Blended microballoon base
Red/brown colour
Cures to a red/brown
Can be mixed into any 105 resin with any 200 series hardener

What is the West System 403 Microfibres?

West System 403 Microfibres Adhesive Filler is a fine fibre blend that is designed to create a multi-purpose adhesive by thickening your blended epoxy resin/hardener combination. This filler is exceptionally good at wood bonding and gap filling, however also does an excellent job wetting-out/penetrating into wood fibres.

Duralac Jointing Compound Tube 115ml

Duralac Jointing Compound Tube 115ml