Hempel Hempatex 5L - White (TRADE)
Hempel Hempatex 5L - White (TRADE) is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
Hempel Hempatex Hi-Build 5L - White | 46410-10000
The Hempel Hempatex 46410 is a physically drying, high-build coating with amazing colour retention and a flat finish. The Hempatex Hi-Build is based with acrylic resin and non-chlorinated plasticizer and contains zinc phosphate.
The Hempel Hempatex Hi-Build is resistant to salt water, animal waste. Recommended as a primer, intermediate or finishing coat in Hempatex systems in moderately corrosive environments.
Specifications
- Colour: White
- Good colour retention
- Fast drying
- Contains zinc phosphate
- Resistant to salt water, splashes of aliphatic hydrocarbons, animal and vegetable oils.
- Recommended thinner & cleaner: Hempel's Thinner 08080 (Available in 750ml & 5L)
- Theoretical spreading rate: 4.2m²/L
- Surface dry after 45 minutes (20℃ / 68℉)
- Hard dry after 1.5 hours (20℃ / 68℉)
Frequently Asked Questions
How long does Hempel Hempatex Hi-Build 5L take to dry?
- Surface dry after 2.5 hours (-10℃ / 14℉)
- Surface dry after 1.5 hours (0℃ / 32℉)
- Surface dry after 45 minutes (20℃ / 68℉)
- Surface dry after 30 minutes (40℃ / 104℉)
- Hard dry after 9 hours (-10℃ / 14℉)
- Hard dry after 4.5 hours (0℃ / 32℉)
- Hard dry after 1.5 hours (20℃ / 68℉)
- Hard dry after 1 hours (40℃ / 104℉)
What do I need to do before I use the Hempel Hempatex Hi-Build 5L?
Remove oil, grease and other contaminants with a suitable cleaning detergent. Then remove all salts, detergants and other contaminants with a high pressure fresh water wash.
For new builds, abrasive blasting to min. PSa 2.5 (ISO 8501-1) / SP 10 (SSPC). Remove dust, blast media and other loose materials
For existing builds, spot abrasive blasting to min. PSa 2 (ISO 8501-2) / SP 6 (SSPC). Minor areas can be hand or power tool cleaned instead. Remove dust, blast media and other loose materials.
How much can I thin the Hempel Hempatex Hi-Build 5L?
- Airless spray: 5% max (nozzle pressure 175 bar and orifice 0.017" - 0.021")
- Air spray: 15% max
- Brush: 5% max
- Roller: 5% max
How many coats of Hempel Hempatex Hi-Build 5L should I do?
It is recommended to apply 1 or 2 coats of Hempel Hempatex Hi-Build to achieve 100 micron dry film thickness or 230 micron wet film thickness. If applying via roller or brush, more coats may be required to achieve specified film thickness.