Hempel Pro-Filler (35370) - 5L (TRADE)
Hempel Pro-Filler (35370) - 5L (TRADE) is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
Hempel Pro-Filler (35370) - 5L (TRADE)
Hempel Pro-Filler 5L - Light Green | 35370-49500
The Hempel Profiller is a light-weight epoxy filler, featuring high adhesion and water resistance. This filler is also easy to sand once fully cured and can be applied in coats up to 10-12mm for a uniform smooth film build.
Hempel's Pro Filler is recommended as a filler and fairing compound, and is especially suited for profiling large areas and detailed fairing where structural length is important.
Specifications
- Can be used above and below the waterline
- Suitable for most primed rigid substrates
- Two parts: Base (35379) & Curing Agent (95720)
- Mixing ratio (base : curing agent): 1 : 1 by volume
- Recommended tool cleaners: Hempel's Thinner 08451 or Hempel's Degreaser 99611
- Theoretical spreading rate: 0.5m²/L
- Touch dry after 6 hours (20℃ / 68℉)
- Ready to sand after 24 hours (20℃ / 68℉)
- Fully cured after 7 days (20℃ / 68℉)
Frequently Asked Questions
How long does Hempel Pro-Filler take to dry?
- Touch dry after 12 hours (10℃ / 50℉)
- Touch dry after 6 hours (20℃ / 68℉)
- Fully cured after 14 days (10℃ / 50℉)
- Fully cured after 7 days (20℃ / 68℉)
- Ready to sand after 24 hours (10℃ / 50℉)
What do I need to do before I use the Hempel Pro-Filler?
Remove oil, grease and other contaminants by suitable detergent cleaning, then clean with Hempel's Pre-Clean.
For new builds, sand and remove dust.
For previously coated surfaces, abrade, clean and dry the surface.
What film thickness should I aim for with the Hempel Pro-Filler?
It is recommended to aim for 2000 micron dry/wet film thickness.
